On-board computer
116
i
Menu overview: see (
Y
page 109).
Displaying messages
Use the buttons on the multi-function steer-
ing wheel.
X
Press the
è
or
·
button repeatedly
until either the original menu or the Mes-
sage memory menu appears.
If the Message memory menu does not
appear, there are no display messages.
If there are messages, the following mes-
sage may appear in the multi-function dis-
play, for example:
2 messages
.
X
Use the
j
or
k
button to scroll
through the display messages.
Settings menu
There are two functions in the
Settings
menu. You can use the
To reset: Press
reset button for 3 seconds
function to
restore most settings to factory settings. You
can also use the submenus here to make indi-
vidual settings for your vehicle.
i
Menu overview: see (
Y
page 109).
Use the buttons on the multi-function steer-
ing wheel.
Resetting to factory settings
For safety reasons, not all functions are reset:
permanent Speedtronic can only be set in the
Vehicle
submenu. The
Headlamp mode
function in the
Lighting
submenu is only
reset if the vehicle is stationary.
X
Press the
è
or
·
button to select the
Settings
menu.
X
Press and hold the reset button on the
instrument cluster for approximately three
seconds.
A prompt appears in the multi-function dis-
play asking you to press the reset button
again to confirm.
X
Press the reset button again.
The functions of most submenus are
restored to factory settings.
or
X
If you want to retain the settings, do not
press the reset button a second time.
The
Settings
menu appears again after
approximately 5 seconds.
X
Press the
è
or
·
button to select a
different menu.
Submenus in the Settings menu
X
Press
è
or
·
to select the
Set-
tings
menu.
X
Press the
j
button to select submenus.
A list of submenus is displayed. More sub-
menus are available than can be displayed
at a time.
Controls
230_AKB; 5; 4, en-GB
bjanott,
Version: 2.9.6
2008-04-08T15:09:54+02:00 - Seite 116
Dateiname: 6515_3089_02_buchblock.pdf;
preflight
