Mercedes-Benz E-Class Cabriolet 2018, Руководство пользователя

Страница: 369 / 553

* NOTE Damage due to unsuitable car
wash
#
Before driving into a car wash make
sure that the car wash is suitable for
the vehicle dimensions.
#
Ensure there is sufficient ground clear‐
ance between the underbody and the
guide rails of the car wash.
#
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is sufficient.
To avoid damage to your vehicle when using a
car wash, ensure the following beforehand:
R
to avoid possible water ingress in the vehicle,
it is preferable to use car washes which allow
the high-pressure pre-cleaning to be deacti‐
vated (specification for the cabriolet pro‐
gram).
R
it is imperative to avoid a subsequent hot-
wax treatment.
R
remove the key in order to ensure that the
wind deflector on the windscreen retracts.
R
Active Distance Assist DISTRONIC and the
HOLD function are deactivated.
R
the 360° Camera or the reversing camera is
switched off.
R
the side windows and soft top are closed
completely.
R
the blower for the ventilation/heating is
switched off.
R
the windscreen wiper switch is in position
g .
R
the key is at a minimum distance of 3 m
away from the vehicle, otherwise the boot lid
could open unintentionally.
R
in car washes with a conveyor system: neu‐
tral i is engaged.
% In car washes with a conveyor system: if you
would like to leave the vehicle while it is
being washed, make sure the key is located
in the vehicle. The j gear is otherwise
automatically engaged.
% If, after the car wash, you remove the wax
from the windscreen and wiper rubbers, this
will prevent smearing and reduce wiper
noise.
Information on using a high-pressure cleaner
& WARNING Risk of an accident when
using high-pressure cleaners with circu‐
lar jet nozzles
The water jet of a circular jet nozzle (dirt
grinder) can cause externally invisible dam‐
age to the tyres or chassis parts.
Components damaged in this way may unex‐
pectedly fail.
#
Do not use high-pressure cleaners with
circular jet nozzles to clean the vehicle.
#
Have damaged tyres or chassis parts
replaced immediately.
To avoid damage to your vehicle, observe the fol‐
lowing when using a high-pressure cleaner:
R
keep the key at least 3 m away from the vehi‐
cle. Otherwise the boot lid could open unin‐
tentionally.
366 Maintenance and care