Mercedes-Benz E-Class Cabriolet 2018, Руководство пользователя

Страница: 248 / 553

Requirements:
R
the ball neck must be extended fully electri‐
cally and engaged in the securely locked
position.
Trailers with a 7-pin plug can be connected to
the vehicle with the following adapters:
R
adapter plug
R
adapter cable
The trailer will be correctly detected by the vehi‐
cle only if the following conditions are met:
R
the trailer is connected correctly
R
the trailer lighting system is in working order
The operation of the following systems depends
on the trailer being connected correctly:
R
Active Lane Keeping Assist
R
ESP ®
R
Parking Assist PARKTRONIC
R
Active Parking Assist
R
Blind Spot Assist or Active Blind Spot Assist
Coupling up a trailer
*
NOTE Damage to the vehicle battery due
to full discharge
Charging the trailer battery using the power
supply of the trailer can damage the vehicle
battery.
#
Do not use the vehicle's power supply
to charge the trailer battery.
#
Remove the cover from the ball head and
store it in a safe place (
→
page 114).
#
Position the trailer on a level surface behind
the vehicle and couple it up to the vehicle.
#
Open the socket cap.
#
Insert the plug with lug 1 in groove 3 on
the socket.
#
Turn the bayonet coupling 2 clockwise as
far as it will go.
#
Let the cap engage.
#
Secure the cable to the trailer with cable ties
(only if you are using an adapter cable).
#
Make sure that the cable is always slack for
ease of movement during cornering.
#
Push the combination switch upwards/down‐
wards and check whether the corresponding
turn signal light on the trailer is flashing.
A display message may appear on the multifunc‐
tion display even if the trailer has been connec‐
ted correctly:
R
LEDs have been installed in the trailer light‐
ing system
R
the current has fallen below the trailer light‐
ing system's minimum current (50 mA)
Driving and parking 245