Mercedes-Benz E-Class Cabriolet 2018, Руководство пользователя, Страница: 110 / 553

Folding back
#
Push the seat back horizontally by the seat
backrest until it reaches the seat position
that was previously set.
#
Fold the seat backrest back until it engages.
Do so as smoothly as possible.
If the seat backrest is not engaged, this will
be shown on the multifunction display of the
instrument cluster. A warning tone will also
sound.
#
After the seat backrest has been folded
back, check the position of the head restraint
and set it to the correct position.
If the set seat position can no longer be reached,
e.g. because of luggage in the rear footwell or
after occupants have entered the rear of the
vehicle:
#
Pull the seat release handle 1 again and
return the seat backrest to an upright posi‐
tion.
The seat will lock in the new fore-and-aft
position.
Switching the seat heater on and off
& WARNING Risk of burns due to repeat‐
edly switching on the seat heater
Repeatedly switching on the seat heater can
cause the seat cushion and seat backrest
padding to become very hot.
The health of persons with limited tempera‐
ture sensitivity or a limited ability to react to
high temperatures may be affected or they
may even suffer burn-like injuries.
#
Do not repeatedly switch on the seat
heater.
* NOTE Damage to the seats caused by
objects or documents when the seat
heater is switched on
When the seat heater is switched on, over‐
heating can occur due to objects or docu‐
ments placed on the seats e.g. seat cushions
or child seats. This could cause damage to
the seat surface.
#
Make sure that no objects or docu‐
ments are on the seats when the seat
heater is switched on.
Requirements:
R
the power supply is switched on
Seats and stowing 107