Mercedes-Benz E-Class Cabriolet 2018, Руководство пользователя

Страница: 417 / 553

R
The vehicle is not on a slope.
R
The vehicle is on solid, non-slippery and level
ground.
#
Apply the electric parking brake manually.
#
Move the front wheels to the straight-ahead
position.
#
Vehicles with automatic transmission:
shift into position j .
#
Vehicles with level control system: set the
normal vehicle level (
→
page 214).
#
Switch off the engine.
#
Make sure that the engine cannot be started.
#
Place chocks or other suitable items under
the front and rear of the wheel that is diago‐
nally opposite the wheel you wish to change.
#
Remove the hub caps if necessary
(
→
page 414).
#
Raise the vehicle (
→
page 415).
Removing and fitting hub caps
Requirements:
R
The vehicle is prepared for a wheel change
(
→
page 413).
Plastic hub cap
#
To remove: turn the centre cover of the hub
cap anti-clockwise and remove the hub cap.
#
To fit: make sure that the centre cover of the
hub cap is turned anti-clockwise.
#
Position the hub cap and turn the centre
cover clockwise until the hub cap engages
physically and audibly.
Aluminium hub cap
#
To remove: position socket 2 on hub cap
1 .
% The socket can be found in the tyre-change
tool kit.
#
Position wheel spanner 3 on socket 2 .
#
Using wheel spanner 3 , turn hub cap 1
anti-clockwise and remove it.
#
To fit: position hub cap 1 and turn until it is
completely flush with the wheel.
#
Position socket 2 on hub cap 1 .
414 Wheels and tyres