Mercedes-Benz E 300, Руководство пользователя

Страница: 319 / 465

#
Remove the tow bar.
#
Remove the towing eye.
#
Have the vehicle checked at a qualified spe‐
cialist workshop.
Electrical fuses
Notes on electrical fuses
&
WARNING Risk of accident and injury
due to overloaded lines
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher
amperage, the electric line could be overloa‐
ded.
This could result in a fire.
#
Always replace faulty fuses with speci‐
fied new fuses containing the correct
amperage.
* NOTE Damage caused by incorrect fuses
Incorrect fuses may cause damage to electri‐
cal components or systems.
#
Only use Mercedes-Benz approved
fuses with the correct fuse rating.
Blown fuses must be replaced with fuses of the
same rating, which you can recognise by the col‐
our and fuse rating. The fuse ratings are listed in
the fuse assignment diagram.
Fuse assignment diagram: on the fuse box in
the boot (
→
page 318).
* NOTE Damage or malfunctions caused
by moisture
Moisture may cause damage to the electrical
system or cause it to malfunction.
#
When the fuse box is open, make sure
that no moisture can enter the fuse
box.
#
When closing the fuse box, make sure
that the seal of the lid is positioned cor‐
rectly on the fuse box.
If the newly inserted fuse also blows, have the
cause traced and rectified at a qualified special‐
ist workshop, e.g. a Mercedes-Benz Service
Centre.
Ensure the following before replacing a fuse:
R
The vehicle is secured against rolling away.
R
All electrical consumers are switched off.
R
The ignition is switched off.
The electrical fuses are located in various fuse
boxes:
R
Fuse box in the engine compartment on the
driver's side (
→
page 317)
R
Fuse box on the driver's side of the cockpit
(
→
page 318)
R
Fuse box in the front-passenger footwell
(
→
page 318)
R
Fuse box in the boot on the right-hand side
of the vehicle, when viewed in the direction
of travel (
→
page 318)
316 Breakdown assistance