Mercedes-Benz E 300, Руководство пользователя

Страница: 141 / 465

#
Make sure that marked space 2 is empty.
#
Remove key 1 from the key ring.
#
Place key 1 in marked space 2 .
The vehicle will start after a short while.
If you remove key
1 from marked space 2
the engine continues running. For further
vehicle starts however, key 1 must be loca‐
ted in marked space 2 during the entire
journey.
#
Have key 1 checked at a qualified specialist
workshop.
If the vehicle does not start:
#
Leave key 1 in marked space 2 .
#
Depress the brake pedal and start the vehicle
using the start/stop button.
% You can also switch on the power supply or
the ignition with the start/stop button.
Running-in notes
To preserve the engine during the first 1,500 km:
R
drive at varying road speeds and engine
speeds.
R
drive in drive program C or E.
R
change gear before the rev counter needle is
Ô of the way to the red area of the rev coun‐
ter.
R
do not shift down a gear manually in order to
brake.
R
avoid overstraining the vehicle, e.g. driving at
full throttle.
R
vehicles with automatic transmission: Do
not depress the accelerator pedal beyond the
pressure point (kickdown).
R
only increase the engine speed gradually and
accelerate the vehicle to full speed after
1,500 km.
This also applies when the engine or parts of the
drivetrain have been replaced.
Please also observe the following running-in
notes:
R
In certain driving and driving safety systems,
the sensors adjust automatically while a cer‐
tain distance is being driven after the vehicle
has been delivered or after repairs. Full sys‐
tem effectiveness is not achieved until the
end of this teach-in process.
R
Brake linings, brake discs and tyres that are
either new or have been replaced only ach‐
ieve optimum braking effect and grip after
several hundred kilometres of driving. Com‐
pensate for the reduced braking effect by
applying greater force to the brake pedal.
138 Driving and parking