Mercedes-Benz E 300, Руководство пользователя

Страница: 160 / 465

R
The vehicle as well as persons and objects,
are located outside the sweep of the garage
door.
#
Press the programming button on the door
drive unit.
Initiate the next step within approximately
30 seconds.
#
Press previously programmed button 1 , 2
or 3 repeatedly, until the door closes.
When the door closes, programming is com‐
pleted.
% Please also read the operating instructions
for the garage door drive.
Troubleshooting when programming the
remote control
#
Check if the transmitter frequency of remote
control 5 is supported.
#
Replace the batteries in remote control 5 .
#
Hold remote control 5 at various angles at
a distance between 1 cm to 8 cm in front of
the inside rearview mirror. You should test
every position for at least 25 seconds before
trying another position.
#
Hold remote control 5 at the same angles
at various distances in front of the inside
rearview mirror. You should test every posi‐
tion for at least 25 seconds before trying
another position.
#
Note that some remote controls transmit
only for a limited period, press button 6 on
remote control 5 again before transmission
ends.
#
Align the aerial line of the garage door
opener unit with the remote control.
% Support and additional information on pro‐
gramming:
R
On the HomeLink ® Hotline on (0) 08000
466 354 65 or +49 (0) 6838 907-277.
R
On the Internet at http://
www.homelink.com.
Driving and parking 157