Mercedes-Benz E 300, Руководство пользователя

Страница: 313 / 465

#
Automatic transmission: Shift the trans‐
mission to position j .
#
Manual transmission: Shift into neutral.
#
Make sure that the ignition and all electrical
consumers are switched off.
#
Open the engine bonnet.
#
Slide cover 1 of positive clamp 2 on the
jump-starting connection point in the direc‐
tion of the arrow.
#
Connect positive clamp 2 on your vehicle to
positive pole of donor battery using the jump
lead/charging cable. Always begin with posi‐
tive clamp 2 on your own vehicle first.
#
During the starting assistance proce‐
dure: start the engine of the donor vehicle
and run at idle speed.
#
Connect the negative pole of the donor bat‐
tery and earth point 3 of your own vehicle
by using the jump lead/charging cable. Begin
with the donor battery first.
#
During starting assistance: start the
engine of your own vehicle.
#
During the charging process: start the
charging process.
#
During starting assistance: let the engines
run for several minutes.
#
During starting assistance: before discon‐
necting the jump lead, switch on an electrical
consumer on your own vehicle, e.g. the rear
window heater or lighting.
When the starting assistance/charging process
is complete:
#
First, remove the jump lead/charging cable
from earth point 3 and negative pole of the
donor battery, then from positive clamp 2
and positive pole of the donor battery. Begin
each time with the contacts on your own
vehicle first.
#
After removing the jump lead/charging
cable, close cover 1 of positive clamp 2 .
You can obtain further information on starting
assistance at any qualified specialist workshop.
Tow starting or towing away
Permitted towing methods
Mercedes-Benz recommends transporting your
vehicle in the case of a breakdown, rather than
having it towed away.
310 Breakdown assistance