Mercedes-Benz 300SDL-TURBO 126 D 1986, Руководство пользователя

Страница: 53 / 113

Showing the “ o ld ” setting firs t allows
fo r reconsideration of the decision to
store. If it is desirable to leave the
“ o ld ” station in memory rather than
exchanging it with the “ new ” one,
quickly release the button. The “ o ld ”
station will remain in memory.
Any AM station can be s to red s imi-
larly on any button marked HfH
through [^ J J .
Stereo reception
The stereo indicator B S S D lights up
if a stereo program in the AM o r FM
band is received.
N ote: Since some AM stereo broad­
casting is not com patible with your
car radio reception capabilities, you
may experience limited AM stereo
reception in some areas. The radio
receives AM stereo program s which
are broadcast via the C-Quam AM
stereo system.
The radio is equipped with an auto­
matic stereo/m ono sw itch that elec­
tronically sw itches to m ono fo r clear
reception if a weak signal is received.
The stereo indicator will remain lit
even if the receiver has changed to
the mono mode and will turn o ff at an
antenna signal considered insufficient
to provide acceptable reception
quality.
N ote: A lthough FM is norm ally static
free, reception quality can be limited
by geographic and atm ospheric co n ­
ditions, station strength and distance
from transm itter. Buildings or other
o b stru ctio n s can cause m om entary
static, flu tte r or station swapping. If
good reception cannot be obtained,
tune to a stro n g e r station.
Tape cassette playback
It is recom m ended to use only good
quality cassettes w ith a playback time
of not more than 90 m inutes (C 90).
To start playback, insert a cassette
(tape side first, side “ 1 ” or " A ” facing
up) through the cassette door. Push
the cassette in until it is locked in its
playing position.
When the end of one playing side is
reached, the unit sw itches autom ati­
cally to reverse fo r playing the second
track.
The tape track can be selected by
d e p ressing the cassette track button
Q E . The built-in indicators show
w hich track of the cassette the unit is
playing back.
To stop p layback, press the eject b u t­
ton
The unit will autom atically
eject the cassette and sw itch to radio
reception.
For fast tape rewind press the fast
rewind button 0 9 . The button will
lock into position until the end of the
tape is reached or u n til the eject | ^ |
or fast forw ard button >s
activated.
A ccordingly, fo r fast forward of the
tape, press the fast forward button
E l
To replay cassettes recorded using
the Dolby B noise red u c tio n system,
the Dolby NR button E
l should
be pressed in. This reduces tape hiss.
When the radio is turned o ff by press­
ing the “ O FF" side of the l i M
button or by turning the key to steer­
ing lock position 0, the cassette
w ill autom atically be ejected.
Tape equalization
For good reproduction quality it is
necessary to adjust the tape player
fo r the particular type of ta p e being
used. Press the CR button E
| in
fo r cassettes using C r0 2 (chromium
dioxide) tape. For all o ther types of
tapes (i.e., ferric oxide, iron, etc.) the
CR button E
| should be out.
OFF