![Mercedes-Benz 2016 GLE Скачать руководство пользователя страница 431](http://html1.mh-extra.com/html/mercedes-benz/2016-gle/2016-gle_operators-manual_1772107431.webp)
Inflating the collapsible spare wheel
(Mercedes-AMG GLE 63)
!
Inflate the collapsible spare wheel using the
tire inflation compressor before lowering the
vehicle. The wheel rim could otherwise be
damaged.
!
Do not operate the tire inflation compressor
for longer than eight minutes at a time without
a break. It may otherwise overheat.
The tire inflation compressor can be operated
again once it has cooled down.
Comply with the manufacturer's safety instruc-
tions on the tire inflation compressor label and
on the tire sealant bottle.
X
Mount the collapsible spare wheel as descri-
bed (
Y
page 409).
The collapsible spare wheel must be mounted
before it is inflated.
X
Remove the tire inflation compressor from
the stowage space under the trunk floor
(
Y
page 369).
X
Pull connector
?
and hose
B
out of the
housing.
X
Remove the cap from the valve on the col-
lapsible spare wheel.
X
Screw union nut
;
of hose
B
onto the valve.
X
Make sure on/off switch
A
of the tire infla-
tion compressor is set to 0.
X
Insert connector
?
into a socket in your vehi-
cle.
Cigarette lighter socket: (
Y
page 342)
12 V sockets: (
Y
page 343)
Observe the notes on the cigarette lighter
(
Y
page 342). Observe the notes on sockets
(
Y
page 343).
X
Turn the SmartKey to position 1 in the ignition
lock (
Y
page 145).
X
Press on and off switch
A
on the tire inflation
compressor to I.
The tire inflation compressor is switched on.
The tire is inflated. The tire pressure is shown
on pressure gauge
=
.
X
Inflate the tire to the specified tire pressure.
The specified tire pressure is printed on the
yellow label of the emergency spare wheel.
X
When the specified tire pressure has been
reached, press on and off switch
A
on the
tire inflation compressor to 0.
The tire inflation compressor is switched off.
X
Turn the SmartKey to position 0 in the ignition
lock.
X
If the tire pressure is higher than the specified
pressure, press pressure release valve but-
ton
:
until the correct tire pressure has been
reached.
X
Unscrew union nut
;
on hose
B
from the
valve.
X
Screw the cap onto the valve of the collapsi-
ble spare wheel again.
X
Stow connector
?
and hose
B
in the lower
section of the tire inflation compressor.
X
Stow the tire inflation compressor in the vehi-
cle.
Emergency spare wheel
429
Wheels
and
tires
Z
Содержание 2016 GLE
Страница 96: ...set correctly If this is not the case repeat the steps above 94 Side windows Opening and closing...
Страница 449: ...447...
Страница 450: ...448...