![Mercedes-Benz 2016 GLE Скачать руководство пользователя страница 301](http://html1.mh-extra.com/html/mercedes-benz/2016-gle/2016-gle_operators-manual_1772107301.webp)
Hybrid drive system
Display messages
Possible causes/consequences and
M
Solutions
d
Vehicle Operational
Switch the Ignition
Off Before Exiting
PLUG-IN HYBRID vehicles:
You are exiting the vehicle when it is in a ready-to-drive state. The
READY indicator in the multifunction display is on. A warning tone also
sounds.
If you leave the vehicle:
X
Secure the vehicle against rolling away (
Y
page 178).
X
Switch off the ignition and remove the SmartKey.
If you do not leave the vehicle:
X
Switch off the electrical consumers, e.g. automatic climate control,
seat heating.
Please note the following: the electrical consumers are supplied by the
12 V battery. If the vehicle is left in a ready-to-drive state for an exten-
ded period, it will switch off once the 12 V battery is almost empty. It
will then only be possible to start the vehicle using a second battery
(jump-starting).
Change the current
drive program
before changing the
operating
mode
or
Exit manual
drive program M
before changing the
operating mode
PLUG-IN HYBRID vehicles:
You have attempted to change the operating mode when in automatic
drive program Sport, Individual (with activated Sport characteristics)
or manual drive program M.
X
Select the Comfort, Slippery or Individual (with activated Comfort or
Eco characteristics) drive program (
Y
page 152).
X
Select the preferred operating mode HYBRID, E-MODE, E-SAVE or
CHARGE (
Y
page 246).
E-MODE Currently
Unavailable
PLUG-IN HYBRID vehicles:
The condition of charge of the high-voltage battery has dropped to the
lower limit and the E-MODE operating mode has been switched off.
Driving with the internal combustion engine is activated and the oper-
ating mode switches to the basic HYBRID setting.
X
Continue driving using the internal combustion engine.
You can switch to the E-SAVE or CHARGE operating mode as
required (
Y
page 246).
If you select CHARGE, the high-voltage battery is charged.
Once the charge level display for the high-voltage battery has
increased slightly, you can switch to the E-MODE operating mode
again.
Display messages
299
On-board
comput
er
and
displays
Z
Содержание 2016 GLE
Страница 96: ...set correctly If this is not the case repeat the steps above 94 Side windows Opening and closing...
Страница 449: ...447...
Страница 450: ...448...