Mercedes-Benz 2016 GLE, Руководство оператора

Страница: 148 / 450

KEYLESS-GO
General notes
Vehicles with KEYLESS-GO are equipped with a
SmartKey featuring an integrated KEYLESS-GO
function and a detachable Start/Stop button.
A check which periodically establishes a radio
connection between the vehicle and the Smart-
Key determines whether a valid SmartKey is in
the vehicle. This occurs, for example, when
starting the engine.
When you insert the Start/Stop button into the
ignition lock, the system needs approximately
two seconds recognition time. You can then use
the Start/Stop button.
Pressing the Start/Stop button several times in
succession corresponds to the different key
positions in the ignition lock. This is only the
case if you are not depressing the brake pedal.
If you depress the brake pedal and press the
Start/Stop button, the engine starts immedi-
ately.
To start the vehicle without actively using the
SmartKey:
R
the Start/Stop button must be inserted in the
ignition lock.
R
the SmartKey must be in the vehicle.
R
the vehicle must not be locked with the
SmartKey or KEYLESS-GO (
Y
page 79).
Do not keep the SmartKey:
R
with electronic devices, e.g. a mobile phone
or another SmartKey.
R
with metallic objects, e.g. coins or metal foil.
R
inside metallic objects, e.g. a metal case.
This can impair the functionality of the KEY-
LESS-GO key.
Do not keep the KEYLESS-GO key in the tem-
perature-controlled cup holder (
Y
page 340).
Otherwise, the KEYLESS-GO key will not be rec-
ognized.
If you lock the vehicle with the SmartKey's
remote control or with KEYLESS-GO, after a
short time:
R
you will not be able to switch on the ignition
with the Start/Stop button.
R
you will not be able to start the engine with the
Start/Stop button until the vehicle is
unlocked again.
If you lock the vehicle centrally using the button
on the front door (
Y
page 85), you can continue
to start the engine with the Start/Stop button.
The engine can be switched off while the vehicle
is in motion by pressing and holding the Start/
Stop button for three seconds. This function
operates independently of the ECO start/stop
automatic engine switch-off function.
Key positions with KEYLESS-GO
:
Start/Stop button
;
Ignition lock
As soon as the ignition is switched on, all the
indicator lamps in the instrument cluster light
up. Further information on situations where an
indicator lamp either fails to go out after starting
the engine or lights up while driving
(
Y
page 317).
If Start/Stop button : has not yet been
pressed, this corresponds to the key being
removed from the ignition.
X
To switch on the power supply: press
Start/Stop button : once.
The power supply is switched on. You can now
activate the windshield wipers, for example.
The power supply is switched off again if:
R
the driver's door is opened and
R
you press Start/Stop button : twice when in
this position
X
To switch on the ignition: press Start/Stop
button : twice.
The ignition is switched on.
If you press Start/Stop button : once when
in this position, the ignition is switched off
again.
146
Driving
Dr
iv
ing
and
pa
rkin
g