Mercedes-Benz 2016 GLE, Руководство оператора

Страница: 106 / 450

X
Once the head restraint is fully lowered, press
release catch : .
X
To raise: pull the head restraint up to the
desired position.
X
To lower: press release catch : and push
the head restraint down until it is in the
desired position.
Removing and installing the rear seat
head restraints
X
To remove: pull the head restraint up to the
stop.
X
Press release catch : and pull the head
restraint out of the guides.
X
To re-install: insert the head restraint so that
the notches on the bar are on the left when
viewed in the direction of travel.
X
Push the head restraint down until you hear it
engage in position.
Adjusting the angle of the rear seat
backrests
You can adjust the angle of the backrests in the
second row of seats. There are several possible
detent positions.
X
Pull the left or right release lever ; upwards
in the direction of the arrow until relevant
backrest : is fully released.
X
Pull backrest : forwards in the direction of
the arrow and allow it to engage.
X
To ensure that the backrest has engaged, lean
firmly against backrest : .
Adjusting the multicontour seat
The multicontour seat can be adjusted via the
multimedia system (see the separate operating
instructions).
Adjusting the 4-way lumbar support
:
Raises the backrest contour
;
Softens the backrest contour
=
Lowers the backrest contour
?
Hardens the backrest contour
You can adjust the contour of the front seat
backrests individually to provide optimum sup-
port for your back.
Switching the seat heating on/off
Switching on/off
G
WARNING
Repeatedly switching on the seat heating can
cause the seat cushion and backrest pads to
become very hot. The health of persons with
limited temperature sensitivity or a limited
ability to react to excessively high tempera-
tures may be affected or they may even suffer
burn-like injuries. There is a risk of injury.
104
Seats
Seats,
steering
w
hee
land
mirrors