Mercedes-Benz 2016 GLC, Руководство оператора

Страница: 371 / 418

X
Remove the towing eye from the left-hand
stowage well under the cargo compartment
floor (
Y
page 355).
X
Press the mark on cover : inwards and
remove.
X
Screw in the towing eye clockwise as far as
it will go and tighten it.
Removing the towing eye
X
Unscrew and remove the towing eye.
X
Attach cover : to the bumper and press
until it engages.
X
Put the towing eye back into the vehicle
tool kit.
Towing a vehicle with both axles on
the ground
The automatic transmission automatically
shifts to position P when you open the driver's
or front-passenger door or when you remove
the SmartKey from the ignition lock. In order
to ensure that the automatic transmission
stays in position N when towing the vehicle,
you must observe the following points:
X
Make sure that the vehicle is stationary.
X
Turn the SmartKey to position 2 in the igni-
tion lock.
X
Depress and hold the brake pedal.
X
Shift the automatic transmission to posi-
tion N.
X
Leave the SmartKey in position 2 in the
ignition lock.
X
Release the brake pedal.
X
Release the electric parking brake.
X
Switch on the hazard warning lamps
(
Y
page 127).
In order to signal a change of direction when
towing the vehicle with the hazard warning
lamps switched on, use the combination
switch as usual. In this case, only the indica-
tor lamps for the direction of travel flash.
After resetting the combination switch, the
hazard warning lamp starts flashing again.
Transporting the vehicle
4MATIC vehicles/vehicles with auto-
matic transmission
!
When the vehicle is loaded for transport,
the front and rear axles must be stationary
and on the same transportation vehicle.
Positioning over the connection point of the
transport vehicle is not permitted. The drive
train may otherwise be damaged.
All vehicles
!
You may only secure the vehicle by the
wheels, not by parts of the vehicle such as
axle or steering components. Otherwise,
the vehicle could be damaged.
The towing eye or trailer tow hitch can be
used to pull the vehicle onto a trailer or trans-
porter if you wish to transport it.
X
Turn the SmartKey to position 2 in the igni-
tion lock.
X
Shift the automatic transmission to posi-
tion N.
As soon as the vehicle has been loaded:
X
Prevent the vehicle from rolling away by
applying the electric parking brake.
X
Shift the automatic transmission to posi-
tion P.
Towing and tow-starting
369
Br
ea
kd
own
ass
ista
nce
Z