Mercedes-Benz 2016 GLC, Руководство оператора

Страница: 229 / 418

A lane-correcting brake application is inter-
rupted automatically if:
R
a driving safety system intervenes, e.g.
ESP
®
, PRE-SAFE
®
Brake or Active Blind
Spot Assist.
R
lane markings can no longer be recognized.
Activating/deactivating Active Lane
Keeping Assist
X
To activate: press button ; .
Indicator lamp : lights up. The Lane
Keeping Assist On message appears in
the multifunction display. If all conditions
have been satisfied, a warning or steering
intervention may be made.
If you drive at speeds above 40 mph
(60 km/h) and lane markings are detected,
the lines in the assistance graphics display
(
Y
page 251) are shown in green. Active
Lane Keeping Assist is ready for use.
X
To deactivate: press button ; .
Indicator lamp : goes out. The Active
Lane Keeping Assist is deactivated. The
Lane Keeping Assist Off message
appears in the multifunction display.
Selecting Standard or Adaptive setting
X
In the DriveAssist menu on the on-board
computer, select the Active Lane Keep‐
ing Assist function (
Y
page 253).
X
Select Standard or Adaptive .
When Standard is selected, no warning
vibration occurs if:
R
you switch on the turn signals. In this
event, the warnings are suppressed for a
certain period of time.
R
a driving safety system intervenes, such
as ABS, BAS or ESP
®
.
When Adaptive is selected, no warning
vibration occurs if:
R
you switch on the turn signals. In this
event, the warnings are suppressed for a
certain period of time.
R
a driving safety system intervenes, e.g.
ABS, BAS or ESP
®
.
R
you accelerate hard, e.g. kickdown.
R
you brake hard.
R
you steer actively, e.g. swerve to avoid an
obstacle or change lanes quickly.
R
you cut the corner on a sharp bend.
In order that you are warned only when nec-
essary and in good time if you cross the lane
marking, the system recognizes certain con-
ditions and warns you accordingly.
The warning vibration occurs earlier if:
R
you approach the outer lane marking on a
bend.
R
the road has very wide lanes, e.g. a high-
way.
R
the system recognizes solid lane markings.
The warning vibration occurs later if:
R
the road has narrow lanes.
R
you cut the corner on a bend.
Towing a trailer
Important safety notes
G WARNING
Installing an unsuitable ball coupling may
result in overloading of the trailer tow hitch
and the rear axle. This applies especially if the
ball coupling in question is longer or angled
differently. This could seriously impair the
driving characteristics and the trailer can
come loose. There is a risk of an accident.
Towing a trailer
227
Dr
iv
in
g
an
d
parkin
g
Z