Mercedes-Benz 2016 GLC, Руководство оператора

Страница: 368 / 418

Do not start the vehicle using a rapid charging device. If your vehicle's battery is discharged,
the engine can be jump-started from another vehicle or from a second battery using jumper
cables. Observe the following points:
R
The battery is not accessible in all vehicles. If the other vehicle's battery is not accessible,
jump-start the vehicle using a second battery or a jump-starting device.
R
You may only jump-start the vehicle when the engine and exhaust system are cold.
R
Only jump-start from batteries with a 12 V voltage rating.
R
Only use jumper cables which have a sufficient cross-section and insulated terminal clamps.
R
If the battery is fully discharged, leave the battery that is being used to jump-start connected
for a few minutes before attempting to start. This charges the battery slightly.
R
Make sure that the two vehicles do not touch.
Make sure that:
R
the jumper cables are not damaged.
R
when the jumper cables are connected to the battery, uninsulated sections of the terminal
clamp do not come into contact with other metal sections.
R
the jumper cables cannot come into contact with parts which can move when the engine is
running, such as the V-belt pulley or the fan.
X
Secure the vehicle by applying the electric parking brake.
X
Shift the transmission to position P.
X
Make sure that the ignition is switched off (
Y
page 153). All indicator lamps in the instrument
cluster must be off. When using the SmartKey, turn the SmartKey to position 0 in the ignition
lock and remove it (
Y
page 153).
X
Switch off all electrical consumers, e.g. rear window defroster, lighting, etc.
X
Open the hood.
Position number B identifies the charged battery of the other vehicle or an equivalent jump-
starting device.
366
Jump-starting
Bre
ak
do
w
n
as
si
stan
ce