Checking the tire pressure electroni-
cally
X
Make sure that the SmartKey is in position
2 in the ignition lock (
Y
page 153).
X
Use
ò
on the steering wheel to call up
the list of menus.
X
Press
9
or
:
on the steering wheel
to select the
Service
menu.
X
Press the
a
button.
X
Press
9
or
:
to select
Tire Pres‐
sure
.
X
Press the
a
button.
The current tire pressure of each tire is
shown in the multifunction display.
If the vehicle was parked for longer than
20 minutes, the following message appears:
Tire pressure will be displayed
after driving a few minutes
.
After a teach-in process, the tire pressure
monitor automatically detects new wheels or
new sensors. As long as a clear allocation of
the tire pressure value to the individual
wheels is not possible, the
Tire Pressure
Monitor Active
message is shown instead
of the tire pressure display. The tire pressures
are already being monitored.
Tire pressure monitor warning mes-
sages
If the tire pressure monitor detects a pressure
loss in one or more tires, a warning message
is shown in the multifunction display. The yel-
low tire pressure warning lamp then lights up.
R
If the
Please Correct Tire Pressure
message appears in the multifunction dis-
play, the tire pressure in at least one tire is
too low. The tire pressure must be correc-
ted when the opportunity arises.
R
If the
Check Tires
message appears in the
multifunction display, the tire pressure in at
least one tire has dropped significantly. The
tires must be checked.
R
If the
Warning Tire Malfunction
mes-
sage appears in the multifunction display,
the tire pressure in at least one tire has
dropped suddenly. The tires must be
checked.
Observe the instructions and safety notes in
the display messages in the "Tires" section
(
Y
page 285).
If the wheel positions on the vehicle are rota-
ted, the tire pressures may be displayed for
the wrong positions for a short time. This is
rectified after a few minutes of driving, and
the tire pressures are displayed for the cor-
rect positions.
Restarting the tire pressure monitor
When you restart the tire pressure monitor, all
existing warning messages are deleted and
the warning lamps go out. The monitor uses
the currently set tire pressures as the refer-
ence values for monitoring. In most cases, the
tire pressure monitor will automatically
detect the new reference values after you
have changed the tire pressure. However, you
can also define reference values manually as
described here. The tire pressure monitor
then monitors the new tire pressure values.
X
Set the tire pressure to the value recom-
mended for the corresponding driving sit-
uation on the Tire and Loading Information
placard on the driver's side
B-pillar (
Y
page 377).
You can find more tire pressure values for
various operating conditions in the tire
pressure table inside the fuel filler flap
(
Y
page 377).
X
Make sure that the tire pressure is correct
on all four wheels.
X
Make sure that the SmartKey is in position
2 in the ignition lock (
Y
page 153).
X
Use
ò
on the steering wheel to call up
the list of menus.
X
Press
9
or
:
on the steering wheel
to select the
Service
menu.
X
Press the
a
button.
X
Press
9
or
:
to select
Tire Pres‐
sure
.
Tire pressure
383
Wheels
and
tir
es
Z
Содержание 2016 GLC
