Mercedes-Benz 2016 GLC, Руководство оператора

Страница: 197 / 418

Activating the HOLD function
X
Make sure that the activation conditions
are met.
X
Depress the brake pedal.
X
Quickly depress the brake pedal further
until : appears in the multifunction dis-
play.
The HOLD function is activated. You can
release the brake pedal.
i
If depressing the brake pedal the first
time does not activate the HOLD function,
wait briefly and then try again.
Deactivating the HOLD function
The HOLD function is deactivated automati-
cally if:
R
you accelerate and the transmission is in
position D or R.
R
the transmission is in position P.
R
you depress the brake pedal again with a
certain amount of pressure until : disap-
pears from the multifunction display.
R
you secure the vehicle using the electric
parking brake.
R
you activate DISTRONIC PLUS.
i
After a time, the electric parking brake
secures the vehicle and relieves the service
brake.
When the HOLD function is activated, the
transmission is shifted automatically to posi-
tion P if:
R
the driver's seat belt is not fastened and the
driver's door is open.
R
the engine is switched off, unless it is auto-
matically switched off by the ECO start/
stop function.
The electric parking brake secures the vehicle
automatically if the HOLD function is activa-
ted when the vehicle is stationary and:
R
a system malfunction occurs.
R
the power supply is not sufficient.
If a malfunction occurs, then the transmission
may be shifted into position P automatically.
AIR BODY CONTROL
General notes
AIR BODY CONTROL is an air suspension sys-
tem with variable damping for improved driv-
ing comfort. All-round level control ensures
the best possible suspension and constant
ground clearance, even with a laden vehicle.
When you drive fast, the vehicle is lowered
automatically to improve driving safety and to
reduce fuel consumption. There is also the
option to manually adjust the vehicle level.
AIR BODY CONTROL consists of level setting,
level control and the Adaptive Damping Sys-
tem ADS.
The vehicle level can be set using the
DYNAMIC SELECT switch (
Y
page 161) or the
level button (
Y
page 196). The setting always
corresponds to the last selected function.
Important safety notes
G WARNING
When the vehicle is being lowered, people
could become trapped if their limbs are
between the vehicle body and the wheels or
underneath the vehicle. There is a risk of
injury.
Driving systems
195
Dr
iv
ing
and
pa
rkin
g
Z