Mercedes-Benz 2016 GLC, Руководство оператора

Страница: 209 / 418

Activating/deactivating the rear view
camera
X
To activate: make sure that the SmartKey
is in position 2 in the ignition lock.
X
Make sure that the Activation by R
gear function is selected in Audio 20 or
COMAND (see the Digital Operator's Man-
ual).
X
Engage reverse gear.
The rear view camera flap opens. The area
behind the vehicle is shown with guide lines
in the Audio 20 or COMAND display.
The image from the rear view camera is
available throughout the maneuvering
process.
To deactivate: the rear view camera deacti-
vates if you shift the transmission to P or after
driving forwards a short distance.
Messages in the Audio 20 or COMAND
display
The rear view camera may show a distorted
view of obstacles, show them incorrectly or
not at all. The rear view camera does not show
objects in the following positions:
R
very close to the rear bumper
R
under the rear bumper
R
in close range above the handle on the
trunk lid
!
Objects not at ground level may appear to
be further away than they actually are, e.g.:
R
the bumper of a parked vehicle
R
the drawbar of a trailer
R
the ball coupling of a trailer tow hitch
R
the rear section of an HGV
R
a slanted post
Use the guidelines only for orientation.
Approach objects no further than the bot-
tom-most guideline.
:
Yellow guide line at a distance of approx-
imately 13 ft (4.0 m) from the rear of the
vehicle
;
White guide line without turning the steer-
ing wheel, vehicle width including the
exterior mirrors (static)
=
Yellow guide line for the vehicle width
including the exterior mirrors, for current
steering wheel angle (dynamic)
?
Yellow lane marking tires at current steer-
ing wheel angle (dynamic)
A
Yellow guide line at a distance of approx-
imately 3 ft (1.0 m) from the rear of the
vehicle
B
Vehicle center axle (marker assistance)
C
Bumper
D
Red guide line at a distance of approx-
imately 12 in (0.30 m) from the rear of the
vehicle
The guide lines are shown when the trans-
mission is in position R.
The distance specifications only apply to
objects that are at ground level.
Driving systems
207
Dr
ivi
ng
an
d
parkin
g
Z