Mercedes-Benz 2013 CL Скачать руководство пользователя страница 68

Страница: 68 / 494

Braking:

If ABS intervenes: continue to depress the

brake pedal vigorously until the braking

situation is over.

To make a full brake application:

depress the brake pedal with full force.

If ABS intervenes when braking, you will feel

a pulsing in the brake pedal.
The pulsating brake pedal can be an

indication of hazardous road conditions and

functions as a reminder to take extra care

while driving.

BAS (Brake Assist System)

Observe the "Important safety notes"

section (

page 65).

WARNING

If BAS is malfunctioning, the braking distance

in an emergency braking situation is

increased. There is a risk of an accident.
In an emergency braking situation, depress

the brake pedal with full force. ABS prevents

the wheels from locking.

BAS operates in emergency braking

situations. If you depress the brake pedal

quickly, BAS automatically boosts the braking

force, thus shortening the stopping distance.
The brakes will function as usual once you

release the brake pedal. BAS is deactivated.

BAS PLUS (Brake Assist System Plus)

BAS PLUS is only available in vehicles

equipped with DISTRONIC PLUS.

Observe the "Important safety notes"

section (

page 65).

BAS PLUS provides braking assistance in

hazardous situations at speeds greater than

4 mph (7 km/h) and uses radar sensor

technology to assess the traffic situation.

This device has been approved by the FCC

as a "Vehicular Radar System". The radar

sensor is intended for use in an automotive

radar system only. Removing, altering or

tampering with the device will void any

warranties, and is not permitted by the

FCC. Do not tamper with, alter, or use the

device in any non-approved way.
Any unauthorized modification to this

device could void the user's authority to

operate the equipment.

With the help of the radar sensor system, BAS

PLUS can detect obstacles that are in the

path of your vehicle for an extended period of

time.
BAS PLUS can also react to stationary

obstacles, e.g. stopped or parked vehicles, at

speeds of up to approximately 40 mph

(70 km/h).
Should you approach an obstacle and BAS

PLUS has detected a risk of collision, BAS

PLUS calculates the braking force necessary

to avoid a rear-end collision.

For speeds above 20 mph (30 km/h): if

you apply the brakes forcefully, BAS PLUS

automatically increases the braking force

to a level suitable for the traffic conditions.

For speeds below 20 mph (30 km/h): if

you apply the brakes, BAS PLUS is

activated. Braking is performed as late as

possible.

If BAS PLUS demands particularly high

braking force, preventative passenger

protection measures (PRE-SAFE

) are

activated simultaneously.

Keep the brake pedal depressed until the

emergency braking situation is over.

ABS prevents the wheels from locking.

The brakes will work normally again if:

you release the brake pedal.

there is no longer any danger of a rear-end

collision.

no obstacle is detected in front of your

vehicle.

Driving safety systems

Safety

Содержание 2013 CL















































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 CL

Отзывы:

Похожие инструкции для 2013 CL

Бренды по названию

Популярные бренды

Mercedes-Benz 2013 CL, Руководство оператора

Результаты поиска

Содержание 2013 CL

Отзывы:

Похожие инструкции для 2013 CL

Бренды по названию

Популярные бренды