Mercedes-Benz 2013 CL Скачать руководство пользователя страница 247

Страница: 247 / 494

Select

Upload/Download Data

and press

to confirm.

Select

Copy Data to Storage Medium

and press

to confirm.

Select the storage medium to which the

data should be copied.

Select

Start Copying

COMAND checks whether the storage

medium has enough storage capacity. If

there is enough storage capacity, the data

is copied to the storage medium.

If there is not enough storage capacity,

remove the storage medium. Make more

storage space available on the storage

medium. Then, try to copy the COMAND

data to the storage medium again.

Remove the storage medium.

Transferring data to another system

(vehicle)

Insert/connect the storage medium (SD

card or USB stick) with the saved data into/

to the relevant interface.

Select

Vehicle

in the main function bar by

turning

cVd

the COMAND controller and

press

to confirm.

The "Vehicle" menu appears.

Select

System

and press

to confirm.

Select

Upload/Download Data

and press

to confirm.

Select

Import Data from Storage

Medium

and press

to confirm.

Select

Start Data Import

A prompt appears, asking whether the

COMAND data should be overwritten.

Press

Yes

to confirm that the data saved in

COMAND should be overwritten.

COMAND imports the data and restarts the

system.

Press

to cancel the import process.

Vehicle

245

COMAND

Содержание 2013 CL















































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 CL

Отзывы:

Mercedes-Benz 2013 CL, Руководство оператора, Страница: 247 / 494

Результаты поиска

Содержание 2013 CL

Отзывы: