Mercedes-Benz 2013 CL Скачать руководство пользователя страница 101

Страница: 101 / 494

Folding the backrest forwards

In order to make it convenient for passengers

to get in and out of the rear compartment, the

driver's or front-passenger seat:

is automatically moved forwards when the

backrest is folded forwards

is automatically moved backwards when

the backrest is folded back

Pull seat release handle

in the direction

of the arrow and fold the backrest

forwards.

The head restraint is lowered and the seat

moves forwards.

Folding back the backrest

Fold the seat backrest back until it

engages.

The seat moves to its original position. The

head restraint is raised. The seat backrest

is engaged again.

Adjusting the multicontour seat

You can adjust the multicontour seat using

COMAND (

page 241).

Adjusting the active multicontour

seat

You can adjust the active multicontour seat

using COMAND (

page 243).

If PRE-SAFE

has been activated, the air

pressure in the air chambers of the

multicontour seat or active multicontour

seat is increased. These air chambers are

located in the side bolsters of the seat

cushion and backrest.

Adjusting the lumbar support

You can adjust the lumbar support using

COMAND (

page 241).

Switching the seat heating on/off

Switching on/off

WARNING

Repeatedly setting the seat heating to level

3 may result in excessive seat temperatures.

The health of passengers that have limited

temperature sensitivity or a limited ability to

react to excessively high temperatures may

be affected or they may even suffer burn-like

injuries. Therefore, do not use seat heating

level 3 repeatedly.

The three red indicator lamps in the button

indicate the heating level you have selected.

If the battery voltage is too low, the seat

heating may switch off.

The system automatically switches down

from level 3 to level 2 after approximately

eight minutes.
The system automatically switches down

from level 2 to level 1 after approximately ten

minutes.

Seats

Seats,

steering

wheel

and

mirrors

Содержание 2013 CL















































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 CL

Отзывы:

Похожие инструкции для 2013 CL

Бренды по названию

Популярные бренды

Mercedes-Benz 2013 CL, Руководство оператора

Результаты поиска

Содержание 2013 CL

Отзывы:

Похожие инструкции для 2013 CL

Бренды по названию

Популярные бренды