Mercedes-Benz 2013 CL Скачать руководство пользователя страница 392

Страница: 392 / 494

Problem

Possible causes/consequences and

Solutions

(USA only)

(Canada only)

÷å!

The red brake warning

lamp, the yellow ESP

and ESP

OFF warning

lamps and the yellow

ABS warning lamp are

lit while the engine is

running.

ABS and ESP

are malfunctioning. Therefore, BAS, BAS PLUS,

EBD, PRE-SAFE

, PRE-SAFE

Brake, the HOLD function and hill

start assist, for example, are not available either.
ATTENTION ASSIST is deactivated.

WARNING

The brake system continues to function normally, but without the

functions listed above. The front and rear wheels could therefore

lock if you brake hard, for example.
The steerability and braking characteristics may be severely

affected. The braking distance in an emergency braking situation

can increase.
If ESP

is not operational, ESP

is unable to stabilize the vehicle.

There is an increased risk of skidding and an accident.

Observe the additional display messages in the multifunction

display.

Drive on carefully.

Visit a qualified specialist workshop.

The yellow ESP

warning lamp flashes

while the vehicle is in

motion.

ESP

or traction control has intervened because there is a risk of

skidding or at least one wheel has started to spin.
Cruise control or DISTRONIC PLUS is deactivated.

When pulling away, only depress the accelerator pedal as far as

necessary.

Ease off the accelerator pedal while the vehicle is in motion.

Adapt your driving style to suit the road and weather conditions.

Do not deactivate ESP

For exceptions, see: (

page 67).

The yellow ESP

OFF

warning lamp is lit while

the engine is running.

ESP

is deactivated.

WARNING

If ESP

is switched off, ESP

is unable to stabilize the vehicle.

There is an increased risk of skidding and an accident.

Reactivate ESP

For exceptions, see: (

page 67).

Adapt your driving style to suit the road and weather conditions.

If ESP

cannot be activated:

Drive on carefully.

Have ESP

checked at a qualified specialist workshop.

390

Warning and indicator lamps in the instrument cluster

On-board

computer

and

displays

Содержание 2013 CL















































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 CL

Отзывы:

Mercedes-Benz 2013 CL, Руководство оператора, Страница: 392 / 494

Результаты поиска

Содержание 2013 CL

Отзывы: