Mercedes-Benz 2013 CL, Руководство оператора, Страница: 168 / 494

X
Select a destination by turning cVd the
COMAND controller and press W to
confirm.
The destination address is shown.
X
Select Save and press W to confirm.
You can now select storage options.
Selecting storing options
X
To save the destination without a
name: select Save without Name and
press W to confirm.
COMAND stores the destination in the
destination memory and uses the address
as the destination name.
X
To save the destination as My address:
select Save as "My Address" and press
W to confirm.
COMAND stores the destination in the
destination memory as My Address . If the
entry already contains navigable data
(symbol L ), a prompt appears asking you
whether the entry should be overwritten.
X
Select Yes or No and press W to confirm.
If you select Yes , the entry is overwritten.
If you select No , the process will be aborted.
X
To save the destination with a name:
select Save with Name and press W to
confirm.
X
Select a category, e.g. Home , and press W
to confirm.
The input menu appears with data fields
and the character bar.
Example display: saving a destination with a name
:
Selected data field with cursor
;
Character bar
X
Proceed as described under "Entering
characters using the character bar" in the
"Entering characters in navigation mode
(entering a city)" section (
Y
page 138).
X
Then, select ¬ and press W to confirm.
COMAND stores the destination under the
name entered.
Assigning a destination to an address
book entry
An address with complete address data that
is suitable for navigation can be assigned to
a pre-existing address book entry. You can
then later start route guidance to this address
straight from the address book
(
Y
page 194).
X
Select Assign Address Book Entry and
press W to confirm.
X
Select a category, e.g. Home , and press W
to confirm.
You will see the address book either with
the character bar or as a selection list.
X
To select an address book entry:
proceed as described in the "Searching for
an address book entry" section
(
Y
page 191).
COMAND stores the data if the address
book entry selected does not yet contain
navigable address data.
If the selected address book entry already
contains navigable address data, a prompt
166
Navigation
COMAND