Mercedes-Benz 2013 CL Скачать руководство пользователя страница 377

Страница: 377 / 494

Display messages

Possible causes/consequences and

Solutions

Radar Sensors
Deactivated See

Oper. Manual

The radar sensor system is deactivated.

Switch on the radar sensor system (

page 348).

Active Lane

Keeping Assist

Currently Unavailable

See Operator's Manual

Active Lane Keeping Assist is deactivated and temporarily

inoperative. Possible causes are:

the windshield in the camera's field of vision is dirty.

visibility is impaired due to heavy rain, snow or fog.

there are no lane markings for a longer period.

the lane markings are worn, dark or covered, e.g. by dirt or snow.

If the display message does not disappear:

Pull over and stop the vehicle safely as soon as possible, paying

attention to road and traffic conditions.

Secure the vehicle against rolling away (

page 287).

Clean the windshield.

If the system detects that the camera is fully operational, the

display message disappears.
Active Lane Keeping Assist is operational again.

Active Lane

Keeping Assist
Inoperative

Active Lane Keeping Assist is defective.

Visit a qualified specialist workshop.

Display messages

375

On-boar

compu

ter

and

displa

Содержание 2013 CL















































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 CL

Отзывы:

Mercedes-Benz 2013 CL, Руководство оператора, Страница: 377 / 494

Результаты поиска

Содержание 2013 CL

Отзывы: