Mercedes-Benz 2013 CL Скачать руководство пользователя страница 354

Страница: 354 / 494

Display messages

Possible causes/consequences and

Solutions

The steerability and braking characteristics may be severely

affected. The braking distance in an emergency braking situation

can increase.
If ESP

is not operational, ESP

is unable to stabilize the vehicle.

There is an increased risk of skidding and an accident.

Drive on carefully.

If the display message disappears, the functions mentioned

above are available again.

If the display message continues to be displayed:

Drive on carefully.

Visit a qualified specialist workshop.

!÷

inoperative See

Operator's Manual

ABS, ESP

, BAS, PRE-SAFE

, the HOLD function and hill start

assist are unavailable due to a malfunction.
BAS PLUS and PRE-SAFE

Brake may also have failed.

The

(USA only)/

(Canada only),

and

warning lamps in the instrument cluster also light up.
ATTENTION ASSIST is deactivated.

WARNING

The brake system continues to function normally, but without the

functions listed above. The wheels could therefore lock if you

brake hard, for example.
The steerability and braking characteristics may be severely

affected. The braking distance in an emergency braking situation

can increase.
If ESP

is not operational, ESP

is unable to stabilize the vehicle.

There is an increased risk of skidding and an accident.

Drive on carefully.

Visit a qualified specialist workshop immediately.

352

Display messages

On-boar

compu

ter

and

disp

lays

Содержание 2013 CL















































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 CL

Отзывы:

Mercedes-Benz 2013 CL, Руководство оператора, Страница: 354 / 494

Результаты поиска

Содержание 2013 CL

Отзывы: