Mercedes-Benz 2013 CL Скачать руководство пользователя страница 284

Страница: 284 / 494

To use the braking effect of the

engine on downhill gradients and

for driving:

on steep mountain roads

in mountainous terrain

in arduous conditions

To use the braking effect of the

engine on extremely steep downhill

gradients and on long downhill

stretches

Restricting the shift range

Pull the left-hand steering wheel paddle

shifter.

The automatic transmission shifts down

one gear and restricts the shift range to the

relevant gear.

If the engine exceeds the maximum

engine speed when shifting down, the

automatic transmission protects against

engine damage by not shifting down.

If the maximum engine speed for the shift

range is reached and you continue to

accelerate, the automatic transmission

shifts up in order to prevent the engine

from overrevving, even if the shift range is

restricted.

Derestricting the shift range

Pull the right-hand steering wheel paddle

shifter.

The shift range is derestricted.

Clearing the shift range restriction

Pull and hold the right-hand steering wheel

paddle shifter until D is shown again in the

multifunction display.

The automatic transmission shifts from the

current shift range directly to D.

Selecting the ideal shift range

Pull the left-hand steering wheel paddle

shifter and hold it in position.

The automatic transmission shifts to the

gear which allows optimum acceleration

and deceleration. To do this, the automatic

transmission shifts down one or more

gears.

Manual drive program

Switching on the manual drive program

The manual drive program is only available for

AMG vehicles.
Manual drive program M is different from

drive program S with regard to spontaneity,

responsiveness and smoothness of gear

changes.
Manual drive program M can be selected

using the program selector button. In manual

drive program M, you can change gear using

the steering wheel paddle shifters if the

transmission is in position D. The gear

currently selected and engaged is shown in

the multifunction display.

Press the program selector button

(

page 280) repeatedly until M appears in

the multifunction display.

Upshifting

In manual drive program M, the automatic

transmission does not shift up

automatically even when the engine

limiting speed for the current gear is

reached. When the engine limiting speed is

reached, the fuel supply is cut to prevent

the engine from overrevving. Always make

sure that the engine speed does not reach

the red area of the tachometer. There is

otherwise a risk of engine damage.

Pull the right-hand steering wheel paddle

shifter (

page 281).

The automatic transmission shifts up to the

next gear.

282

Automatic transmission

Driving

and

parking

Содержание 2013 CL















































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 CL

Отзывы:

Mercedes-Benz 2013 CL, Руководство оператора, Страница: 284 / 494

Результаты поиска

Содержание 2013 CL

Отзывы: