Menzer VCL 320 Скачать руководство пользователя

Страница: 21 / 71

8 GB

GB 9

4.3 Working environment

•

DANGER

– Any operation of the device in explo-

sive environments is strictly prohibited!

•

WARNING

– Do not operate the device in the

immediate vicinity of flammable materials, as they
could ignite from flying sparks.

•

WARNING

– Do not use the device for vacuuming

dust off people or animals!

• Keep your hands, hair, feet and loose-fitting

clothing away from the suction components of the
device and/or additionally cover these.

• Do not use the vacuuming component near your
head.

• Avoid physical contact with grounded surfaces
like radiators or tubes.

• Use suitable and undamaged extension cords only.

• Wear non-skid work boots.

• Ensure secure footing (good ground contact and
balance) for yourself and the device, and avoid
working too far overhead, as you might lose your
balance.

•

WARNING

– Read the data sheets provided by

the material manufacturers of the materials to
be vacuumed. The device must not be operated
if spontaneously combustible or explosive dusts
and/or liquids are generated, as a spark strike
could have fatal consequences.

•

WARNING

– When operating the device in

hazardous areas (e.g. petrol stations or similar),
relevant applicable safety regulations must be
adhered to.

• Ensure that your workplace is ventilated and
well-lit at all times to prevent accidents.

• Ensure that there are no other persons at your

workplace or that there is a sufficient safety dis

tance between you and the next person.

• Do not expose any part of the device to caustic
media (e.g. chemicals) or excessive heat (above

60 °C). Do not operate the device outdoors or in
temperatures below 0° Celsius.

5. General description

of the machine

5.1 Machine illustrations and type descriptions
and functional accessory

(see page *1* to *4*)

• VCL 320 (A1) / VCL 330 (A2)

5.2 Main components, connection and operat

ing elements

(see page *2* and *3*)

– Industrial vacuum cleaner –

MENZER VCL 320 / 330

01 – Suction head – consisting of:

      B 02  –  ‘Filter Refresh’ button
      B 03  –  Hand grip
      B 04 –  Switch (

)

      B 05  –  Power socket
      B 06 –  Hose and cable holder
      B 07  –  Hook for accessory pouch

(Optional accessory)

      B 08 –  Hose connector for blow function
      B 09 –  Power cable
      B 10  –  Filter cap

B 11 – Cartridge filter
B 12 – Filter cage with float

01 – Container – with:

C 02 – Container clip
C 03 – Suction hose connection

C 04 – Dust class identifier
C 05 – Lid over container run-off

01 – Chassis with accessory fixtures

D 02 – Rear wheels
D 03 – Front casters

* Illustrations may vary depending on device type

5.3 Commissioning

Caution!

The mains plug must be disconnected

from the mains socket and not reconnected while
any of the tasks described below are being carried
out!

5.3.1 Removing the device and accessories
from the packaging

a. Remove all device accessories and the indus

trial vacuum cleaner from the packaging.

5.3.2 Assembly of the device including acces

sories

Attention!

The suction nozzles (K and L)

and suction pipes (J) are connected to the

elbow joint (H) via a tight-sealing cone. Take care

not to crush your fingers. Pull the components for

disassembly. The elbow joint (H) and the rotatable
suction hose adapter are connected to the suction
hose (E) via clip system and are delivered
pre-assembled (see page *5*). Please read
Chapter 5.2 – Main components, connection and
operating elements.

•

Applicable only for vacuum cleaners with a

container volume of 30L – VCL 330:

Remove the container clip provided (C 05) from
within the dust container and attach it to the lower
area on the front of the container (see page *8* –
Illustration 9a. and 9b.).

5.3.2.1 Assembly of the casters and chassis

• Press the rotatable front wheels over the knurled
cover areas of their rotating axes into the bore
holes provided in the plastic chassis (see page *8*
– Illustration 10a. and 10b.).

5.3.2.2 Assembly of the suction hose

Caution!

The suction nozzles provided and

depicted on page *4* are intended for use

exclusively with the MENZER industrial vacuum
cleaner VCL 320 / VCL 330. The suction hose (E)
with the elbow joint (H), the suction tubes (J) and
the suction nozzles can be combined as shown on
page *4*. Please note the notes regarding the use
of the functional accessories in the following text.

Notes on the use of the functional accessories:

G – Universal tool adapter
H – Elbow joint for receiving the suction tube (J)
and/or the suction nozzles (K and L)
J – Suction tubes for extending the work range of
the device
K – Floor nozzle wet/dry with casters for level
areas

L – Crevice nozzle for difficult to reach joints,

corners and edges

Please also read Chapter 10. Functional accesso-
ries and peripherals.

5.4 Dry vacuuming

•

WARNING

– Never use the device for the vacu-

uming of flammable, explosive or acidic dusts and

substances!

• Ensure a correctly installed, intact and – where

possible – empty fleece filter bag before you begin

working (F – see page *7* – Illustration 7a.–7c.).