Mendota FV42-0518, Инструкция по установке и эксплуатации

Страница: 27 / 84

27
FV42 85-03-01068
WILLOWBROOK/GRACE FRONT GUIDE OPTIONS
This unit comes with guides to ensure finish materials do not exceed the convection area of the fireplace.
Some models come with additional guides for different front options.
There are three options for finishing the fireplace when installing a Grace or Willowbrook front.
Please read the following instruction before installing the finishing material on the front of the fireplace. If
you have any questions about finishing the fireplace contact a Mendota dealer or the Mendota Service
Department.
•
For painted wall finishes, refer to this manual on suitable finishing materials.
•
Remove any front, screen, or door prior to install of finish materials to avoid damage.
OPTION 1: INSTALLING THE FRONT ON TOP OF FINISHING MATERIAL
Note
: No extra parts required.
Option 1 requires that your finish material be less than 2.5” thick, including backing materials and reasonably
flat. If not, use Option 3.
•
Use the inner guides that come on the fireplace.
•
The guides are 1” deep. If your finish material is rough or lightly colored and extends past 1”, you
may see the material behind the screen at certain angles.
After the fireplace is installed and the finishing material is complete the front can be hung on the fireplace.
The finished look is similar to hanging a picture frame on a wall where the frame protrudes out from the wall.
Because the screen is attached to the back of the Grace or Willowbrook front, there will be a ¾” gap between
the frame and wall. If you do not want this gap, but want the frame to mount over the finishing material,
then consider using Option 2.
f i r e - p a r t s . c o m