Mendota FV42-0518, Инструкция по установке и эксплуатации

Страница: 70 / 84

70
FV42 85-03-01068
Icon Details
Mode Button: Pressing the mode button toggles between the various available functions: flame
height, fan speed, accent light intensity and rear burner on/off.
Flame Height: Six flame height levels are available. While the flame height icon is
displayed, pressing the up or down button once will increase or
decrease the flame height by 1 of 6 increments.
If the flame height is at Level 1 and the down button is pressed, all
burners will turn off.
If in IPI mode, the pilot will also extinguish.
If in CPI mode, the pilot will remain on.
Note: If in Smart Thermostat, the flame height function is not available for
manual adjustment. In Smart Thermostat, the flame height regulates
automatically.
Fan Speed Control:
The fan speed can be adjusted through 6 speeds and
off. To activate this function, press the Mode button until it
displays the fan icon. Use the up/down arrow button to turn
on, off, or adjust the fan speed. Once you set the desired fan
control, the system will remember your selected fan speed
until you manually change it.
Accent Light: This function controls the accent light functions. Pressing the
up button in this mode will turn on the accent light and allow
you to control the 6 levels of intensity. Once you set the
desired light intensity, the system will remember your
selection until you manually change it.
Rear Burner: This function controls the rear burner on/off feature. Pressing
the up button in this mode will turn on the rear burner, and
pressing the down button will turn off the rear burner. The
flame height of the front burner will not change when you
turn the rear burner on or off. The flame height can only be
changed in the Flame Height mode.
f i r e - p a r t s . c o m