Mendota FV42-0518, Инструкция по установке и эксплуатации

Страница: 12 / 84

12
FV42 85-03-01068
Heating Performance
With its high heat output, this Mendota fireplace will heat a large area of the home if located properly to
maximize heat/air circulation. Air movement options for maximizing heat circulation that can be considered
are the continuous operation of central heating furnace blowers or ceiling fans. The most efficient method
for overall heat distribution within a single room is a ceiling fan. The heat output of the fireplace can be
reduced by turning off the rear burner and reducing flame height using the remote control. Blowers can be
turned down or turned off to reduce heat distribution.
Aesthetic Considerations
Burning or static fireplaces are a major aesthetic focus in any room. Position your gas fireplace as you would
a television set. A well-placed Mendota fireplace will be a continuing source of comfort and interest. Corner
installations will afford you the greatest potential for viewing in many rooms. This fireplace may be installed
in an elevated position as long as 72” minimum distance is provided between the floor level of this fireplace
and the room’s ceiling surface.
Manual Gas Shutoff Valve Installation Requirement
A manual shutoff ball valve is factory installed in the fireplace and is accessible through the air gap on the left
of the glass frame. Use the glass latch tool to operate the shutoff ball valve. If local building codes require,
obtain an external wall-mounted manual gas shutoff valve approved per local gas plumbing codes and install
per local gas plumbing codes in the specified location.
f i r e - p a r t s . c o m