Mellanox Technologies MSX6512-4R Скачать руководство пользователя страница 92

Страница: 92 / 129

Rev 2.2

Mellanox Technologies

Appendix G: Safety Warnings (Multiple Languages)

G.1

Nordic Countries Notices

G.2

Installation Safety Warnings (English)

1. Installation Instructions

2. Bodily Injury Due to Weight

3. Heavy Equipment

4. Risk of Electric Shock!

5. Over-temperature

Finland: “Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan”

Norway: “Apparatet må tilkoples jordet stikkontakt”

Sweden: “Apparaten skall anslutas till jordat uttag”

Read all installation instructions before connecting the equipment to the power source.

Use enough people to safely lift this product.

This equipment is heavy and should be moved using a mechanical lift to avoid injuries.

Risk of Electric Shock!

With the fan module removed power pins are accessible within the module cavity.

DO NOT insert tools or body parts into the fan module cavity.

This equipment should not be operated in an area with an ambient temperature exceed-
ing the maximum recommended: 45°C (113°F). Moreover, to guarantee proper , allow
at least 8cm (3 inches) of clearance around the ventilation openings.

Содержание MSX6512-4R


































































































































Результаты поиска

Содержание MSX6512-4R

Отзывы:

Mellanox Technologies MSX6512-4R, Руководство пользователя по оборудованию, Страница: 92 / 129

Результаты поиска

Содержание MSX6512-4R

Отзывы: