Mellanox Technologies MSX6512-4R Скачать руководство пользователя страница 73

Страница: 73 / 129

InfiniBand FDR Switch Platform Hardware User Manual

Mellanox Technologies

4.1

Power Supply and Spine Board Indicator Status at Power ON

As the power is turned on, you should observe the following conditions for normal oper-
ation:

1. Power Supply Unit(s) AC OK and DC OK indicators are ON and FAIL indicators are

OFF.

2. There is a

green

Status LED per spine board, per leaf board, and per management

module that indicates power supplies are good.

3. Spine Board indicators will display status of internal links to the installed leaf boards.

All PHY links to existing leaf Boards should be ON.

4. Check the Spine LEDs and make sure they coincide with Figure 61.

Figure 61: Spine Side Panel Display Status Indications

5. Check the Management Module LEDs and make sure they coincide with Figure 62.

Figure 62: Management Module Status Indications for Normal Operation

It can take up to 5 minutes to boot up the system. Turn off the system if any LEDs
remain red for more than 5 minutes.

MGT

CONSOLE

RST

I2C

Master

L.FANS

S.FANS

PSU

MAC

Содержание MSX6512-4R


































































































































Результаты поиска

Содержание MSX6512-4R

Отзывы:

Mellanox Technologies MSX6512-4R, Руководство пользователя по оборудованию, Страница: 73 / 129

Результаты поиска

Содержание MSX6512-4R

Отзывы: