Mellanox Technologies MSX6512-4R Скачать руководство пользователя

Страница: 78 / 129

InfiniBand FDR Switch Platform Hardware User Manual

Mellanox Technologies

2. Determine which spine has a defective fan by checking the Fan LEDs on all of the

spines.

3. Make sure that there is nothing blocking the front or rear of the chassis and that the

fan modules and ventilation holes are not blocked (especially dust over the holes).

4. If you find dust blocking the holes it is recommended to clean the fan unit and

remove the dust from the front and rear panels of the switch using a vacuum cleaner.

5. Remove and reinstall the fan unit of the spine. Make sure the mating connector of the

new unit is free of any dirt and/or obstacles. See Section 2.10.4 on page 54.

6. Replace the spine fan module.

6.4

Spine Board

Issue 1.

The yellow LED on the Spine board is lit:

1. Check the MLNX-OS management for confirmation and possible explanation of the

alert.

2. Make sure that there is nothing blocking the front or rear of the chassis and that the

fan modules and ventilation holes are not blocked (especially dust over the holes).

3. If you find dust blocking the holes it is recommended to clean the fan unit and

remove the dust from the front and rear panels of the switch using a vacuum cleaner.

4. Remove and reinstall the spine board. Make sure the mating connectors of the unit is

free of any dirt and/or obstacles. See Section 2.10.3 on page 49.

5. Make sure that the spine and the Leafs both have the same version of FW.

6. Reburn the FW and remove and reinstall the spine.

7. Replace the spine board.

6.5

MLNX-OS® Software

For more detailed instructions concerning MLNX-OS® software see the Mellanox
MLNX-OS® SwitchX® Software WebUI User’s Manual or the Mellanox MLNX-OS®
SwitchX® Software User Manual.

Replace defective spine fan modules as soon as they are identified.

Содержание MSX6512-4R


































































































































Результаты поиска

Содержание MSX6512-4R

Отзывы:

Похожие инструкции для MSX6512-4R

Бренды по названию

Популярные бренды

Mellanox Technologies MSX6512-4R, Руководство пользователя по оборудованию

Результаты поиска

Содержание MSX6512-4R

Отзывы:

Похожие инструкции для MSX6512-4R

Бренды по названию

Популярные бренды