Mellanox Technologies MSX6512-4R Скачать руководство пользователя страница 60

Страница: 60 / 129

InfiniBand FDR Switch Platform Hardware User Manual

Mellanox Technologies

Interfaces

3.1

LED Status Indicators

The LEDs are placed on the chassis for the convenience of the IT manager. All chassis
conditions and management options are available and controllable through the manage-
ment software, either CLI or WebUI.

3.1.1

Power Supply Unit LEDs

Each Power Supply Unit has the following indicator LEDs.

Figure 50: Power Supply Unit Status Indications

AC – When lit this LED indicates input voltage between 100 and 240 Volts.

DC FAIL – When lit this LED indicates a fault in the power supply.

DC OK – When lit this LED indicates that the output from the power supply is +48
VDC.

It is recommended that all of the chassis sub systems be maintained and managed
through the management software.

The PSUs are on the spine side of the chassis behind two cover panels. The plugs for
these PSUs are on the leaf side of the chassis.

FAIL

Содержание MSX6512-4R


































































































































Результаты поиска

Содержание MSX6512-4R

Отзывы:

Mellanox Technologies MSX6512-4R, Руководство пользователя по оборудованию, Страница: 60 / 129

Результаты поиска

Содержание MSX6512-4R

Отзывы: