Meler Micron + 10 Скачать руководство пользователя страница 56

Страница: 56 / 120

FOCKE MELER GLUING SOLUTIONS

4-18

MELTER OPERATION

PISTÓN

HMI

: S02001101 v1.1.2

: S02200100 v1.0.84

IO FM : XXXXXXXXX vx.x.x

10 min

85 °C

60 s

Modbus

B: 57600

Node: 10

2.2 Extra Settings

Inside device temperature alarm

Off after reset

Screen saver

Sound on alarm

Pumping autolock

2.2 Extra settings

• Activate or deactivate the alarm sound.

To stop the sound, press the

ALARM icon on the HOME screen.

• Activate or deactivate the screensaver.

The screen switches off after the

set time has passed. If you press the screen when it is off, it turns on and

the HOME menu appears.

• Cabinet temperature alarm:

A value (+°C/°F) and a time are defined to

indicate when the alarm is activated due to overheating inside the unit’s

electrical cabinet. If it reaches this temperature and maintains it for the set

time, the unit disconnects the heating of all zones and stops the pumping.

• Automatic pumping block.

Please see the ‘Automatic pumping block

function’ section.

• Turning off after resetting.

Please see the ‘Turning off after resetting

function’ section.

• Modbus.

Activate and disable external communications via Modbus.

PISTÓN

HMI

: S02001101 v1.1.2

: S02200100 v1.0.84

IO FM : XXXXXXXXX vx.x.x

2.2 Extra Settings

Regrind charger

Channel number

Feeder

Pattern controller

Level detector

Extermal HMI

Wireless communication

Bluetooth

Flowmeter

• Number of channels.

Set up the number of electrical outputs enabled in

the melter.

• Automatic feeder.

Activate or disable the operation of the automatic

feeder.

• Feeder.

Activate or disable the operation of the external adhesive feed

(external liquid load or pellet level).

• Pattern controller.

Activate or disable the pattern controller functions.

• Level sensor.

Activate or disable the operation of the level sensor.

• External HMI.

Activate or disable the operation of the external HMI

control.

• Wireless communications.

You can enable or disable the operation of the

unit’s wireless communication system (Wi-Fi). Click on the arrow to go to

the configuration screen. See the point on ‘Wireless communications’ for

further information.

• Bluetooth.

Activate or disable the Bluetooth function.

Click on the arrow to go to the configuration screen. See the point on

‘Bluetooth connection Annex’ for further information.

If you try to access a restricted menu, a pop-up appears, requesting the

password.

If the EXPERT password is entered, the unit remains unlocked for 15 minutes.

Whenever there is activity on the screen, the system remains in this mode. If the

end of this 15 minutes is reached, the unit returns to USER mode.

If you forget the EXPERT level password, contact the Focke Meler main offices to

find out how to proceed to recover it.

Содержание Micron + 10

























































































































Результаты поиска

Содержание Micron + 10

Отзывы:

Meler Micron + 10, Инструкция по эксплуатации, Страница: 56 / 120

Результаты поиска

Содержание Micron + 10

Отзывы: