Meler Micron + 10 Скачать руководство пользователя страница 46

Страница: 46 / 120

FOCKE MELER GLUING SOLUTIONS

4-8

MELTER OPERATION

Pumping status

083

Zone heating.

There is no physical connection of components in that zone.

---

Temperature sensor error in that zone.

150

Zone in Temperature OK.

120

Zone in Standby mode.

Zone in Inhibition mode (OFF).

165

Zone in overheating or low temperature warning.

Note:

For a zone to be able to give a low temperature warning, it must have

first reached its set point temperature.

170

Zone in overheating or low temperature alarm.

Note:

For a zone to be able to give a low temperature warning, it must have

first reached its set point temperature.

Access the SHORTCUTS menu by pressing the temperatures area.

Temperature status

Pumping not activated.

Pumping activated.

Click on the icon to go to the Flowmeter menu (optional).

Содержание Micron + 10

























































































































Результаты поиска

Содержание Micron + 10

Отзывы:

Meler Micron + 10, Инструкция по эксплуатации, Страница: 46 / 120

Результаты поиска

Содержание Micron + 10

Отзывы: