manualshive.com logo in svg

Meler Micron + 10, Инструкция по эксплуатации, Страница: 119 / 120

Поделиться
Скачать
Meler Micron + 10 Скачать руководство пользователя страница 119

V1020

Javier Aranguren

Managing Director

EC DECLARATION OF CONFORMITY  

(Only for equipments with wifi system integrated) 

The manufacturer,

 

Focke Meler Gluing Solutions, S.A.

Pol. Arazuri-Orkoien, c/B, nº3 A

E-31170 Arazuri - Navarra - Spain

— Focke Group —

declaring that the machinery,  Type: 
 Model: 
 

Serial Number: 

fulfils all the relevant provisions of the Directive 2006/42/EC on machinery, 
and the object of the declaration described above is in conformity with the relevant Union harmonisation 

legislation:

• 

Directive 2014/30/EU on the harmonisation of the laws of the Member States relating to electromagnetic 

compatibility .

• 

Directive 2011/65/EU and its amendments on the restriction of the use of certain hazardous substances in 

electrical and electronic equipment.

• 

Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on 

the market of radio equipment.

In reference to the harmonised standards: 

• 

EN ISO 12100:2010. Safety of machinery - General principles for design - Risk assessment and risk reduction.

• 

EN ISO 13732-1:2008. Ergonomics of the thermal environment - Methods for the assessment of human 

responses to contact with surfaces - Part 1: Hot surfaces.

• 

EN ISO 13849-1:2015. Safety of machinery - Safety-related parts of control systems - Part 1: General principles 

for design.

• 

EN ISO 14120:2015. Safety of machinery - Guards - General requirements for the design and construction of 

fixed and movable guards.

• 

EN 60204-1:2006, +/A1:2009, +/AC:2010. Safety of machinery - Electrical equipment of machines - Part 1: 

General requirements.

• 

EN 61000-6-2:2005, +/AC:2005. Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity 

for industrial environments.

• 

EN 61000-6-4:2007, +/A1:2011. Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission 

standard for industrial environments.

• 

EN 50581:2012. Technical documentation for the assessment of electrical and electronic products with respect 

to the restriction of hazardous substances.

• 

ETSI EN 300 328 V2.1.1 Wideband transmission systems; Data transmission equipment operating in the 2,4 

GHz ISM band and using wide band modulation techniques; Harmonised Standard covering the essential 

requirements of article 3.2 of Directive 2014/53/EU.

• 

Draft ETSI EN 301 489-1 V2.2.0 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; 

Part 1: Common technical requirements; Harmonised Standard covering the essential requirements of article 

3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive 2014/30/EU.

• 

Draft ETSI EN 301 489-17 V3.2.0 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; 

Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard covering the 

essential requirements of article 3.1(b) of Directive 2014/53/EU.

This declaration of conformity is issued under the sole responsibility of the manufacturer.
The person authorised to compile the technical file is the manufacturer established at the above address in 

this declation.
Signed in Arazuri, to date: 

Original Declaration

Содержание Micron + 10

























































































































Отзывы:

Нет отзывов