Meiko K-Tronic, Руководство по обслуживанию

Страница: 17 / 248

Operating instructions dishwashing machine model K-Tronic
Datei:2K_9626212_Betriebsanleitung-MIKE_EN_2005-12-01.doc gültig ab: 2003-01 Update: 2004-05-07
Ident-Nr.: 9619165 14/38
W e reserve the right to change execution and construction!
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: 0781/203-0, Fax: 0781/203-1174
5.4 Installation and assembly
MEIKO has prepared an assembly diagram showing the machine dimensions and the
connected loads in detail.
Assembly is completed by reference to the assembly diagram and, in general, by
following the instructions of a trained MEIKO engineer.
The installation must o n l y be connected by suitably qualified personnel.
We accept no liability for connections carried out by unqualified personnel.
After unpacking, position the appliance as indicated in the assembly diagram and as the
dimensions allow.
The appliance must be level and straight when erected.
If the machine is delivered divided in a number of parts, the joints must be thoroughly
treated with P819 activator (MEIKO ordering no. 9 503 233) and sealed on the inside with
silicone (Sista F 108 – MEIKO ordering no. 0 870 001 or M509, MEIKO ID no. 9 518 385;
in paint shops Sikaflex 260 – MEIKO ordering no. 0 870 030).
.
Sista P 819 activator
activator
order no.
9 503 233
Sista F 108
Special Silicon adhesive
order no.
0 870 001
Sista M 509
Special Silicon adhesive
order no.
9 518 385
Sikaflex - 260
strong adhesive
order no.
0 870 030
A sealing strip must be applied to the exterior.
It should be recessed by about 1 mm and is intended to improve the optical appearance.
5.5 Floor load from the dish-washing machine
The floor load per foot (with a loaded surface of D=30 mm per foot) is:
•
for dish-washers without a heat pump: approximately 150 kg
•
for dish-washers with a heat pump: approximately 200 kg
5.6 Instructions for the disposal of the packaging material
•
The four-sided wooden frame consists of untreated, raw pine / spruce.
•
The plastic sheeting (PE sheeting) may be recycled.
•
The cardboard packaging material used to protect the edges can also be recycled.
•
The steel tensioning strap made of strip steel may be recycled with the steel scrap.
•
The plastic tensioning strap of plastic (PP) can be recycled.
ATTENTION!