Configuration
52
Step Action
6
Activate
Mobile data
.
7
Under
Login
,
Password
and
APN
, enter the access point data into the mobile
data network.
If you have selected the SIM card of an All-In-One service provider with in-
house access points (see above), you must enter the data made available by
this provider here.
Otherwise, you need only enter the access point of your network provider (e.g.
Web.vodafone.de) and you can dispense with the entering of
Login
and
Password
.
8
Save the settings using the button
and then also as basic settings (see
page 45).
9
To ensure that the SFC250 was able to log into the cellular network, you
should send a test SMS (see page 49).
If the access to the user interface is to occur over a VPN connection, an OpenVPN
server must be rented or set up and configured for the intended purpose by the server
provider or the IT department, respectively.
When doing this, the configuration files of the server must be adapted so that each
supply module logging on as a client is always assigned the same fixed IP. When
configuring the server, the following files must also be created and made available
which are required for the activation and configuration of the pre-installed OpenVPN
client on the supply module:
•
Certificate file (*.crt) for identification of the client on the server
•
Key file (*.pem) with the required keys for the communication between client
and server
•
Configuration file (*.conf) with the essential parameters
In addition, a text file must be created with a suitable editor along the lines of the
following example, which contains the login information (login name in 1st line and
password in 2nd line) for logging onto the server:
The file must then be saved as a text file with the suffix *.login.
Configuring the
OpenVPN client
(optional)
[email protected]
samplepassword
