Controlling and monitoring in running operation
35
The remote control can be switched on with a brief press of the button
. If, after
switching on, the LED integrated in this button lights up red, this indicates that the
residual capacity of the batteries is low.
Directly after switching on, the remote control attempts to establish the wireless
connection to the coupled supply module. This is signalled by the flashing blue wireless
status LED
.
As soon as the connection has been established, the LED lights up permanently blue.
The remote control will attempt to connect to the supply module for about 1 minute
before turning off automatically. If no radio connection can be established within this
time, this may indicate that the distance to the supply module is too great or one of the
conditions described on the previous page has not been met. In order to be able to rule
out the first cause safely, you should work with the antenna plugged in (without antenna
the range is only 20 m max.) and the distance to the supply module should be reduced.
As soon as a radio connection has been established, the current switching state of the
power switches is signaled by the button
. It can take the following states:
Color Meaning
Green
The power switches in all connected power modules are switched off.
Red
The power switch of at least one connected power module is on.
By pressing the button
, depending on the configuration and the current status of the
power switches, the following switching operations can now be carried out:
Status
Pressing the key causes the
following switching action
LED
The power switches in all
connected power modules are off
All power switches are switched on.
The power switches in at least
one but not all connected power
modules are on
All open power switches are now
switched on as well.
The power switches in all
connected power modules are on
All power switches are switched off.
If the button
is pressed for at least 3 seconds, a kind of emergency shutdown
is performed and all power switches are switched off, independent of the current
status
.
Switching on and
establishing the
wireless connection
Performing switching
operations
