Configuration
49
6.3
Modifying the notification and network settings
6.3.1
Modifying the notification settings
SMS or E-mail notifications can only be sent when the supply module has been
configured for mobile data communication (see page 51) and is connected with a
cellular network or cellular data network (see page 23).
Using the menu
Settings
Communications
GSM
Notifications
, the
following notification settings can be defined (also accessible by clicking on the
communications symbol in the main screen):
Parameter
Description
Notification in
case of warning
threshold
crossing?
Using this drop-down menu, you can define how often a notification
should be sent when a warning threshold is violated.
Send notification
for the following
events:
Using these checkboxes, you can specify the events for which a
notification should be sent.
SMS recipient
number 1 / 2
Mobile phone numbers to which notifications will be sent by SMS.
The country code does not need to be used as long as the number
to be notified is in the same country. In this case, the numbers must
be entered with a leading 0 (for example, 0172 *******).
If the number is entered with country code, a + must be used as a
prefix (for example, +49172 *******).
There must be no spaces or special characters between the
individual digits.
Send test SMS
Using this button, a test message (SMS and/or E-mail) can be sent
to the specified phone numbers / E-mail addresses as a way to
check for correct entry of the numbers and to also test the GMS
connection.
E-Mail 1 / 2
E-mail addresses to which notifications will be sent.
In order to be able to send notifications to the specified email
addresses, the data of an SMTP outgoing mail server must be
specified (see page 54).
The settings must then be saved using the
button.
