Configuration
47
6.2
Pairing and enabling the remote control
In order to use the remote control for switching operations (power switch on/off, pulse
mode on/off), it must be coupled with the supply module.
For reasons of safety, the
coupling can only be performed directly on the supply module.
Proceed as follows:
Schritt Aktion
1
If not already installed, insert two mignon-type batteries (AA) in the remote
control. However, do not switch the remote control on yet!
2
Open the user interface locally on the supply module and open the page
SFC250-RC
.
Result:
The dialogue for managing the remote control opens.
3
Call up the menu item
Couple a SFC250-RC
.
Result:
The message
Perform RC pairing
appears in the
Status
line.
4
Take the remote control and move about 2 meters away from the supply
module.
5
Press and hold the
button on the remote control. Now press the
button
briefly and let it go again directly. Then release the
button as well.
Coupling the remote
control
