Megger IDAX Series, Руководство пользователя

Страница: 68 / 74

IDAX User's Manual 68
© 2009 Megger AB
No Message Explanation
227 "DraftSpecVersion" not
assigned "DraftSpecVersion" must be assigned. See User's
Manual for options.
228 "Configuration" not
assigned "Configuration" must be assigned if using a
Termination Box with relays. See User's Manual for
options.
229 Value not assigned
If cat 'P' is assigned, the field can not be left blank.
Errors related to IDAX 206 system and measurement settings
No Message Explanation
301 Wrong argument in
"LinSweep" function Wrong number/type of argument. See User's Manual
Appendix A.6 for options
302 Wrong argument in
"LogSweep" function Wrong number/type of argument. See's Manual
Appendix A.6 for options.
303 Settings could not be
saved User settings could not be saved.
306 No DSP device name The name of the DSP instrument is not valid, contact
a service supplier.
307 Could not open DSP The DSP instrument did not connect properly.
308 No geometric capacitance
309 Error initializing DSP.
DSP not present or
inactive. The DSP instrument did not connect properly.
311 Neither the file LastC.icf
nor specified file could
be found The C-file is not found in the system. Probably
problem with reading/writing to disc or Windows
registry.
312 Unknown "C-File" command The specified command does not exist. Most likely a
typing error.
313 Wrong number of arguments Too few or too many arguments in a command.
314 No "Amplitude"
"Amplitude" must be assigned. See User's Manual
Appendix A.5 for options.
315 No "Frequency" "Frequency" must be assigned. See User's Manual
Appendix A.5 for options.
319 No measurement to comment Comments are possible during a measurement or
directly after the measurement.
320 No current measurement No measurement which has been started.
321 DSP variables wrong The DSP-variables (e.g. MinTime, MinCycles, etc.) are
wrong.
322 DSP code not found No or wrong DSP code found in the system.
323 Index does not exist
in NT registry Problems accessing Windows Registry.
324 Could not interpolate
calibration data Could not interpolate transfer functions.
325 No voltage source selected A voltage source must be selected before measuring.
327 Could not get info from
DSP Problems with the connection to the DSP instrument.
329 "MeasurementPerPoints"
must be greater than zero. One measurement at each frequency must be
performed.
330 DSP reset failed Problems with the connection to the DSP instrument
331 "Else" without "if" Syntax error in C-file.
332 "End" without "if" Syntax error in C-file.
333 Only variables or
constants are allowed Only variables or constants are allowed in an if–else
statement.
334 Types does not match Wrong type of data (e.g. string assigned to an
integer).
339 Error updating "D-File" Measured data was not properly added to the D-file.
340 Invalid voltage The desired voltage is out of the specified limits.
Possible typing error in the C-file.
341 Invalid current The applied settings results in a current that is too