Megger IDAX Series, Руководство пользователя

Страница: 64 / 74

IDAX User's Manual 64
© 2009 Megger AB
2.2.1
Data Structure
Test Browser is arranged as a tree-like structure consisting of:
§ Objects
§ Measurement Sequences
§ Measurement Plans and data files
Objects
Each object is represented by an object template specified in a file Object.obj. This file contains
the information about the object which is constant such as owner, manufacturer, serial number,
etc. There are several pre-defined Object Templates for power transformers, bushings and
cables. Depending on user's needs these files can also be modified as well as new templates can
be created.
When creating new objects it is recommended to select Measurement Templates which can be
associated to those objects.
Measurement Sequence
Measurement Sequence is created in order to make a measurement and therefore at least one
Measurement Template must be associated with the Object.
Measurement structure
In order to perform a measurement a Measurement Sequence must be available or a new one
must be created. New sequence is created by selecting desired object and press File / New /
Measurement Sequence. This will result in:
·
A dialog will appear where a test date and an optional name of Measurement Sequence
can be defined
·
All Measurement Templates associated with the object will be copied to the folder of new
Measurement Sequence (inclusive the object information) as command or C-files (*.icf).
· In order to run a measurement, a command file from those under Measurement Sequence
is chosen and IDAX is started by pressing ON.
·
When measurement is started, the command file is replaced by a data file containing both
information from the command file and measurement data. Finished measurement can be