Megger IDAX Series, Руководство пользователя

Страница: 18 / 74

IDAX User's Manual 18
© 2009 Megger AB
2. By pressing <F5> on the keyboard, an oscilloscope will be displayed on the screen. The Ch 0
(red) signal in the oscilloscope displays the applied voltage over the sample,
Ch 1
(white) is
the output voltage from the first electrometer and Ch 2 (blue) is the output voltage from the
second electrometer. The output voltage from the electrometer is a function of the current
through the sample.
3. The instrument stops automatically after the last measurement point is completed, however,
the measurement can be interrupted earlier by a stop command. You can press stop button
or, on the IDAX-206, the OUTPUT OFF button. On the IDAX-206 a lit green READY LED on
the front panel indicates that the measurement is stopped or finished.