Megger IDAX Series, Руководство пользователя

Страница: 67 / 74

IDAX Error Messages 67
© 2009 Megger AB
No Message Explanation
106 Key could not be deleted Problem accessing Windows Registry.
107 Redeclaration of variable A variable is declared two or more times in the C–
file.
108 Error writing to file The log file from a Calibration or a Self test could
not be created.
109 Incorrect data type The Data type specified does not exist.
112 Cannot start measurement Displayed when IDAX is not properly set up in order
to perform a measurement. Usually accompanied by
a more detailed message.
113 Error reading Windows
registry
Problem accessing Windows Registry.
Errors associated with C-file
No Message Explanation
201 Not a complex number Variable is expected to be complex number in "X+Yi"
format.
202 Illegal assignment Wrong type has been assigned to variable.
203 Unknown directive Incorrect command. Most likely a typing error.
204 No "Data type" specified Type must be specified before data field. Example: $
Type = 'R'
205 No "Category" specified Category must be specified before data field.
Example
$ Cat = 'C'
206 Incorrect "Category"
Wrong variable in category (Cat) has been used.
208 Error on line Indicates the number of line in C-file, where error
was detected.
209 "VoltageSource" incorrect "VoltageSource" has to be of a defined type. Most
likely a typing error.
210 Boolean is expected for
check box ("CB") Check boxes can have only Boolean values.
211 Not an integer Parameter values must be of the same type as in the
parameter declaration.
212 Not a real Parameter values must be of the same type as in the
parameter declaration.
213 Not a Boolean Parameter values must be of the same type as in the
parameter declaration.
214 Unknown "Data type" "Data type" must be of a defined type. Most likely a
typing error.
216 Wrong number of arguments Too few or too many arguments in a variable.
217 Syntax error Undefined error in the syntax. Usually accompanied
by additional information.
218 To few radio buttons in
group ("RB") There must be at least two buttons in a radio group
219 Not a radio buttons item
("RB") The function is assigned to a value that does not
match any radio button. Most likely a typing error.
220 Not an array of integers Parameter values have to be of the same type as in
the parameter declaration.
221 Invalid bitmap "Image" Image is not a *.bmp file or the file is corrupted.
222 Variable not declared All new variables must be declared with a "New"
function.
223 "AmplitudeScale" not
assigned "AmplitudeScale" must be assigned. See User's
Manual for options.
224 "VoltageSource" not
assigned
"VoltageSource" must be assigned. See User's
Manual for options.
225 "FileType" not assigned "FileType" must be assigned. See User's Manual for
options.
226 "SpecVersion" not assigned "SpecVersion" must be assigned. See User's Manual
for options