Megger BITE 3, Инструкция по эксплуатации

Страница: 34 / 42

M
AVTMBITE 3 Rev 8 April 2014
28
F
WARNING
Do not replace the fuse with a value greater than the
1amp 250v fast blow fuse. Doing so may cause
damage to the test instrument should excessive
current flow.
Fuse (1 Amp Fast Blow, 250V) Part No. 2544-2
Battery
The battery used is a NiMH battery rated at 4.8Vdc and 7000mAh. It is designed
to operate for two to four hours under heavy testing. It will fast-charge to 90%
of rated capacity in one hour and fully charge in 24 hours. A button on the side
will display the approximate capacity remaining (10% per bar).
As a safety feature the instrument is designed so that it can’t be used while the
battery is charging.
NOTE: The crossed out wheeled bin placed on the batteries is a reminder not to
dispose of them with general waste at the end of their life.
This product contains the NiMH battery pack rated at 4.8Vdc.
It can be safely removed by unclipping the 2 fasteners on the old battery
pack and then installing the new battery pack.
Spent NiMH batteries are classified as Portable Batteries and should be
disposed of in the UK in accordance with Local Authority requirements.
For disposal of batteries in other parts of the EU contact your local
distributor. Megger is registered in the UK as a producer of batteries.
The Registration number is BPRN01235.
Probe Tips
The probe tips are spring-loaded to break through oxide coatings and No-Ox
greases to make a solid connection. Even though the tips are designed with
ruggedness in mind, spare tips have been included with the instrument. Should a
tip become damaged, simply pull, using pliers, the tip and replace it with a new
one. The tip should be snug, not loose nor overly tight.