Running tests automatically, semi-automatically, or manually
After you have selected a motor for testing, completed selecting the tests you want to run, and
made adjustments to the test parameters (if needed) you can simply click on the red Run Auto Test
button found in the Tests tab.
The software will then execute each test in turn, providing you with visual cues along the way for
setting up test leads, entering temperature values (if selected), and displaying test results within
the related test screens.
Figure 19. Controls used to run automatic and semi-automatic testing.
You can run tests semi-automatically by clicking on the individual test type buttons found in the
Tests
tab. The software will perform the same functions as during automatic testing, but only for
the selected test.
As noted in the setup screen descriptions, each screen has controls for manually executing tests.
Resistance and surge tests even allow you to test individual leads. Tests can also be run manually
using the analyzer’s front panel controls.
Figure 20. Controls within setup screens to run tests manually.
Basic Testing Procedures
Baker AWA -IV Static Motor Analyzer
www.megger.com
18
